If your TV and headphones are supposed to work together, then you need to connect them. Tons of people usually spend a lot of time figuring out how to make this happen, but the process is simple. This article provides a detailed process on how to connect artiste headphones to Samsung TVs.
Why can’t I connect my Bluetooth headphones to my TV?
There are a few possible reasons you cannot connect Bluetooth headphones to a TV.
- One possibility is that the TV does not have Bluetooth capabilities.
- Another possibility is that the TV’s Bluetooth capabilities are disabled.
- You might not be in close enough proximity to your TV, or the Bluetooth range may not reach you.
- Additionally, there may be an issue with pairing your phone to the headset, or some wires might be disconnected.
- If the TV has Bluetooth connectivity, but the headphones don’t have Bluetooth connectivity, then the headphones will only be able to transmit audio from a 3.5mm or RCA cable.
If the TV has Bluetooth connectivity and the headphone has Bluetooth technology, you should be able to connect them without any cables!
How to Connect artiste headphones to Samsung TV?
You might want to watch TV at full volume without disturbing your loved ones, or perhaps you’re looking for a way to cancel out distracting noises in this room or your neighboring flat. Regardless of the reason, connecting artiste wireless headphones is often confusing with the reason; it can be confusing to figure out how to connect artiste wireless headphones to a Samsung TV.
Bluetooth still isn’t on many TVs, which makes it hard to connect Bluetooth headphones. There are different headphones, but the best way is a dedicated wireless set like the artiste wireless headphones.
To connect artiste wireless headphones to Samsung TV, follow the below steps:
- Both devices need to be in “discovery” mode when you pair the TV and the headphones. It might be due to a default setting if your TV includes Bluetooth but doesn’t detect headphones.
- Turning on the Bluetooth feature on most TVs can be done by accessing the “Options” or “Settings” menu.
- The instructions for enabling Bluetooth can be found in your TV’s manual. Samsung TVs, for example, require you to allow Bluetooth under the “Engineering” menu. Then, after turning on the feature, restart your TV and return to the “Sound” settings.
Bluetooth headphones can offer a lot of benefits. They keep your hands free and make it easy to answer or dial without fumbling for your phone. You can also use them outdoors and work out with them—they’re durable, comfortable, and sweat resistant.
How do I pair my artiste wireless headphones?
To connect the headphone:
- The transmitter power must be disconnected.
- Make sure the headphones are turned off. Then, for 5 seconds, press and hold the ON/OFF control until the green LED flashes rapidly.
- The transmitter power should be connected.
- An automatic connection will be made between the headphones and the transmitter.
How do I connect wireless headphones to my Samsung Smart TV without Bluetooth?
You can wirelessly connect through an app on your phone or another media-streaming device with Bluetooth capabilities or use a 3.5mm optical cord to plug it directly into the TV. And if Bluetooth isn’t an option, you can still connect them to the TV wirelessly by placing the transmitter near the TV and then connecting with a three ft-long cord.
Another option is connecting the included base station via your TV using an optical cable or 3.5mm analog cable. This base will act as your wireless headphones’ antenna and pre-pair them with the TV set, so you can immediately listen to media. In addition, simply plugging in this base allows your headphones to sync to the TV set automatically.
The range of these headphones is up to 300 feet. If you need to run to the kitchen for a snack or take a quick break, you can still listen to your favorite movie or TV show uninterrupted.
One thing to note when using wireless headphones is that you may need to swap between wireless and corded speakers depending on where the soundbar is plugged in. You will need to switch between the two devices depending on whether your soundbar is connected via analog or optical ports. You can keep your TV’s audio output as default if your soundbar is connected via HDMI or another port.
How do I connect my wireless headphones to my HDMI TV?
All you need to do is open Settings > Controllers & Bluetooth Devices > Other Devices > Add New Device. Then, put your wireless headphones in pairing mode, which should appear on the screen. Once you select them, your TV’s audio will come through your headphones.
Artiste wireless TV headphones troubleshooting
If you’re having trouble with your Artiste wireless TV headphones, there are a few things you can try to troubleshoot the issue.
First, ensure that the headphones’ batteries are fresh and properly installed. If the batteries are low, they may not be able to provide enough power to keep the headphones connected wirelessly to the TV.
Next, check the connection between the headphones and the TV. Ensure the transmitter is correctly plugged into the TV’s audio output jack. If it’s not, plug it in and try again.
Finally, if you’re still having trouble, reset the headphones. This will clear any stored data in the headphones and should help resolve any connection issues.
Artiste wireless TV headphones manual
The manual will show you how to connect your Artiste headphones to a Samsung TV and also the best way to use them with your TV. You can follow our guide if you have an old-fashioned TV that doesn’t support Bluetooth or Wi-Fi technology.
There you have it — a quick and easy guide on connecting your artiste headphones to your Samsung TV. Whether you’re looking to watch movies or TV shows with enhanced audio quality or enjoy peace and quiet, this method will surely get the job done. So go ahead and try it- we guarantee you won’t be disappointed!
Frequently Asked Questions:
Yes! Studio Wireless is Bluetooth headphones, and they come with other features.
To turn them on automatically, remove them from the charging case. Then, press and hold the Multi-function button on the headphone or the Volume down button until the LED flashes green (on) or red (off).
Multi-Function Button (MFB) Press the MFB button to turn on the headphones, initiate pairing, answer or end phone calls, control playback and pause, and turn them off.
This could be a variety of reasons, but the two most common possibilities are that your headphones are not on the same Bluetooth channel as your Samsung TV, or you may need to troubleshoot whether your headphone and TV settings are compatible. So first, check if your phone and TV are on the same Bluetooth channel. If they’re not, move them to one of the six available channels. Next, look at your phone’s settings to see if it has a setting for “Connect with TV” or something similar. If it does, check that this setting is enabled.
Many smart TVs come with Bluetooth nowadays, which means you can pair your headphones to your TV; that way, you can watch something and listen to music simultaneously.